14 replies to this topic

[sgc1]

Hi has any one got one of these machines as need some help on the wiring of the plugs for the coin hopper conection, as the wiring and size of hopper tray appear diffrent to what should be in a Magic 7.
I got this machine as a non worker but have sorted the board which had battery damage and now need to source the correct hopper and tray.
Attached photo of tray opening and the conector from the machine.
Thanks

Attached Files

•  20161216_153236m7.jpg   186.81KB   5 downloads
•  20161221_190007m7.jpg   200.29KB   2 downloads

Edited by sgc1, 12 January 2017 - 07:19 PM.

[127127]

Hi sgc1, I have a Big7 casino style which is the same unit your one is housed in, the hopper should be an azkoyen u type parallel but not sure on the wiring although should be quite an easy set up (famous last words)!! Have had to grease my hopper gears as they are prone to sticking but are an easy hopper to dis/reassemble.Unfortunately I too have lots of stray wires and blanks prob due to break in or different parts but works ok.

[TommyC]

You have to remember that wiring loom and plug is for 2 hoppers. These came with two hoppers when brand new.

[sgc1]

Thanks
I have bought a tray and hopper recently which had been taken out of a Magic 7 but the tray was smaller than what i have the plug was in a diffrent position and the wiring to the plug does not corespond to what i have,so i am a little confused, here is no wiring diagram in the manual.

[TommyC]

I have a magic 7 and bar x 7 manual with my machine sure they dont give a wiring diagram for the wiring of the hopper pins.

[mainjohn]

hi as tommy says these machines had 1 hopper to start with then got a second when a note acceptor was put in

[sgc1]

Tommyc
Would you mind posting a photo of the conector plugs and hopper tray of your Magic 7 please.
Thanks

[TommyC]

Im away working till sunday. Remind me sunday and i will. Mine is a bar x 7

[TommyC]

Hi here's some images from my classic bar x 7. The first lot are from that and the second lot are from my classic big 7, same set up inside though,hope they help.
Second lot are from my classic big 7

Attached Files

•  20170115_115938.jpg   57.75KB   5 downloads
•  20170115_115915.jpg   74.53KB   5 downloads
•  20170115_120036.jpg   98.2KB   5 downloads
•  20170115_120155.jpg   100.92KB   5 downloads
•  20170115_120210.jpg   124.27KB   4 downloads
•  20170115_120247.jpg   127.85KB   3 downloads
•  20170115_120704.jpg   107.17KB   4 downloads
•  20170115_120728.jpg   113.81KB   3 downloads
•  20170115_120754.jpg   129.22KB   4 downloads
•  20170115_120818.jpg   102.01KB   3 downloads

[sgc1]

Thanks Tommy
Your Bar x tray looks like the right one,to suit mine will have to suit mine.
I do h ave a Azokoyn hopper which came out of a magic 7 but the colour coded wiring do sent corespond with my machine.

[richy1976]

Don't think we got the sounds for this.
If it works on the emu?

[mainjohn]

dont think this wil be emulated because of security so ive been told dont quite understand how bar xtreme is surely that has the same security

[TommyC]

Different tech i would imagine.

[richy1976]

Bar x extreme is scorp5, I was thinking this maybe s4.

Edited by richy1976, 17 January 2017 - 05:03 PM.

[richy1976]

I got a flyer for electrocoin casino crazy and it's in a bfm cab.
There's no roms.