Jump to content


Photo

{Epoch}Sir Winalot


  • Please log in to reply
7 replies to this topic

#1 wearecity

wearecity

    MFME v whatever the next version number user.

  • Regulars
  • 1672 posts

Posted 15 September 2017 - 01:00 PM

File Name: Sir Winalot

File Submitter: wearecity

File Submitted: 15 Sep 2017

File Category: Epoch


My 3rd layout (I'll promise, I'll stop keeping count now) is Sir Winatot.
 
It's by Maygay, an Epoch machine and set at 25p £15 and 82%.
 
Thanks go to.......
 
Reg for the hi-lo reel from Club Spotted Dick, Vectra for the 7 symbol reels, & other reels from Italian Job 3,  whoever upped the rom to paradise, whoever sold the machine, which gave me an image to go by.
 
Some notes: The image I went by, wasn't great, but I believe everything is labeled correctly, a couple of things like trail held and lose, may be not in the right place. I've included it in the zip, if you don't know the machine. Reels, no actual machine reels, so I had to make the overlays on the reels as I couldn't find any standard Maygay Epoch reels with numbers on (will update if they come to light). No standard or Maygay Jackpot symbol, so Global one used.
 
Everyone should have the fonts used, resisted using lithograph as I think the font used on the cash/feature trail, is a far better match to the actual machine.
 
Err.....that's it I think.


Click here to download this file


  • spa likes this

#2 gemini17

gemini17

    GOLD Supporter

  • Regulars
  • 1751 posts

Posted 15 September 2017 - 01:50 PM

File Name: Sir Winalot

File Submitter: wearecity

File Submitted: 15 Sep 2017

File Category: Epoch

 


 

My 3rd layout (I'll promise, I'll stop keeping count now) is Sir Winatot.
 
It's by Maygay, an Epoch machine and set at 25p £15 and 82%.
 
Thanks go to.......
 
Reg for the hi-lo reel from Club Spotted Dick, Vectra for the 7 symbol reels, & other reels from Italian Job 3,  whoever upped the rom to paradise, whoever sold the machine, which gave me an image to go by.
 
Some notes: The image I went by, wasn't great, but I believe everything is labeled correctly, a couple of things like trail held and lose, may be not in the right place. I've included it in the zip, if you don't know the machine. Reels, no actual machine reels, so I had to make the overlays on the reels as I couldn't find any standard Maygay Epoch reels with numbers on (will update if they come to light). No standard Maygay Jackpot symbol, so Global one used.
 
Everyone should have the fonts used, resisted using lithograph as I think the font used on the cash/feature trail, is a far better match to the actual machine.
 
Err.....that's it I think.

 

 


Click here to download this file

Was a bloody awful slot to play in the arcades and took hundreds to get a play out of it,so im more than sure many will enjoy some sweet revenge. :o

Many thanks to all involved with the release.

 

Will download later and give it a good bashing.

 

Jay



#3 westy20040

westy20040

    Layout Designer

  • Regulars
  • 681 posts

Posted 15 September 2017 - 03:19 PM

Thanks for this :)



#4 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 9041 posts

Donator

Posted 15 September 2017 - 03:47 PM

Thanks for this layout
The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#5 TommyC

TommyC

    Layout Designer

  • Layout Creator
  • PipPipPipPipPip
  • 2832 posts

Posted 15 September 2017 - 07:41 PM

Many thanks for the layout.
Hold the bells mate.

#6 andy-1

andy-1

    Layout Creator

  • Layout Creator
  • PipPipPipPip
  • 1987 posts

Posted 15 September 2017 - 08:30 PM

Thank You



#7 Magz

Magz

    Senior Member

  • Regulars
  • 887 posts

Posted 15 September 2017 - 09:16 PM

Thanks - should it not be £15 + Repeat at the top of the trail though?



#8 wearecity

wearecity

    MFME v whatever the next version number user.

  • Regulars
  • 1672 posts

Posted 16 September 2017 - 08:11 AM

Haha, yes you're right magz. I got a bit carried away with getting the shape of that part, as close as I could of the real machine. Updated now.






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users