60 replies to this topic

[richy1976]

I wanted to try and replicate the lamp masks, kind of what I done on my psycho cash beast win panels.
Could do with a good pic, there's no video of this either just the awp version and both boards lamp different, just the text lights awp and more light comes through the bottom board.

Edited by richy1976, 22 January 2019 - 10:57 AM.

[vectra666]

I wanted to try and replicate the lamp masks, kind of what I done on my psycho cash beast win panels.
Could do with a good pic, there's no video of this either just the awp version and both boards lamp different, just the text lights awp and more light comes through the bottom board.

You mean the whole square lights up not just the text similar to what I've done on club Corrie I also did similar on the dungeons and drag queens feature boards
You have to lasso a straight edge then lamp it as normal dragging in the light slightly then the next lamp to it you'll need to lasso a straight edge right next to that lamp then you'll need to erase the sharp edge out via ps not sure what tool it is atm but I know what I mean maybe pm you a guide laters

Attached Files

•  post-17577-0-59426200-1524777662.png   815.04KB   0 downloads
•  post-2929-0-46503300-1492118571.png   1.57MB   0 downloads

Edited by vectra666, 22 January 2019 - 11:57 AM.

[richy1976]

Yes kind of like that Vecs.

But these go on angels a bit, thats why want a pic.

Thanks.

[vectra666]

Angles same as straight lines, as in dungeons and drag queens, easy to do just need to lasso the edges right next to each other or blend the lamps

[richy1976]

I will carry on with this in the next day or 2.

The plan is to put some lines in between each one, by just birightening it up a bit, kind of like in the image i have put up (just on the on image), then lamp over them with each lamp going to the middle of the line and hopefully it will look like masks if goes well.

Probably do something with berty barcrest as well, outline him or put another one on.

Attached Files

•  Club Frenzy £250 ON2.png   2.98MB   0 downloads

Edited by richy1976, 26 January 2019 - 03:27 PM.

[TommyC]

On the shot zones it's only the text that lights up mate,it's the feature board were the surround also lamps.

[vectra666]

On the shot zones it's only the text that lights up mate,it's the feature board were the surround also lamps.

Not according to the real image posted on page two, the feature board just text lit and shot zone whole square lit. Where as the AWP version have both the whole section lit?
I personally would be lit the feature board and the shot zones as the AWP version but it's upto Richy and I'm positive he'll make it as accurate as technically possible.

[richy1976]

The bottom board is lamped the whole section but most light comes through the symbols, you can't really tell on the image.

[TommyC]

Not according to the real image posted on page two, the feature board just text lit and shot zone whole square lit. Where as the AWP version have both the whole section lit?
I personally would be lit the feature board and the shot zones as the AWP version but it's upto Richy and I'm positive he'll make it as accurate as technically possible.

Pay attention vecs,if you look closely at the flyer or photo,you can see the trace outline of the lamp mask which will tell you the whole thing lights up not just the text

[richy1976]

I have lost the motivation at the moment to carry this on, will go back to it soon.

[richy1976]

Heres the plan of action, then brighten just the text up a bit.

And maybe put some masks on it.

Attached Files

•  Club Frenzy £250 ON2.png   3.03MB   0 downloads

Edited by richy1976, 31 January 2019 - 01:26 AM.

[cashbox1]

looks fantastic richy,if you need a tester when its done....

[richy1976]

Heres how were looking now, on the most time consuming, pain in the backside, lucky it never went in the recycle bin layout in the world.

 

Attached Files

•  Club Frenzy £250 ON2.png   2.99MB   0 downloads

[richy1976]

Does anyone know this font or the type?.

Thanks.

Attached Files

•  f7.png   169.31KB   0 downloads

[vectra666]

i'll take a look in a mo my photoshops having a fit atm

[vectra666]

couldn't find anything close enough

[richy1976]

Thanks will just have to use something else, cant remember what I used last time to make one that would of done.

[TommyC]

Whats the 7 for and what flyer is it from mate.

[vectra666]

Whats the 7 for and what flyer is it from mate.

its for the hi lo reel on club frenzy also the flyer is of the same machine

[richy1976]

Layout not far off complete apart from reels and some masking left.