Jump to content


Photo

Remove machine recognising note detector fitted


  • Please log in to reply
12 replies to this topic

#1 adaptle

adaptle

    Newbie

  • New Members
  • 6 posts

Posted 03 June 2019 - 08:34 PM

Hi all, perhaps I am being dumb but is it possible for the machine to realise a note acceptor has been removed. I have made sure both the aux plug is unplugged, also the serial cable is unplugged from the square block ie loom. But machine hopper is still registering 250 not 125. Just a small thing but trying to understand what I am missing. I can see the vend bus loom seems to up to the coin mech does this need amending so the note acceptor isn't registered? Also tried the machine menu in test mode but not sure what I need to amend.

#2 adaptle

adaptle

    Newbie

  • New Members
  • 6 posts

Posted 03 June 2019 - 09:11 PM

Sorry should have said. Machine is rainbow riches mpu5.

#3 fruitsnappa

fruitsnappa

    Part of the furniture

  • Regulars
  • 1304 posts

Posted 03 June 2019 - 09:17 PM

Enter test and set BNV code to 000000



#4 adaptle

adaptle

    Newbie

  • New Members
  • 6 posts

Posted 03 June 2019 - 09:37 PM

Thanks for the reply I get bnv not fitted when trying that.

#5 fruitsnappa

fruitsnappa

    Part of the furniture

  • Regulars
  • 1304 posts

Posted 03 June 2019 - 09:46 PM

And what is your float set to now? After you reset machine.



#6 adaptle

adaptle

    Newbie

  • New Members
  • 6 posts

Posted 03 June 2019 - 10:03 PM

Still showing 250 at the moment :(

#7 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 9041 posts

Donator

Posted 03 June 2019 - 10:14 PM

The max float on my £70 reflex is £350 with notey\ £250 without, it needs this amount for when it does the £210
i.e £70 repeat x 3
The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#8 adaptle

adaptle

    Newbie

  • New Members
  • 6 posts

Posted 03 June 2019 - 10:21 PM

Currently my machine is set to 5pound jackpot so assume it's not that either :) . It's doing my head in thou as ran out of ideas and Google isn't being my friend, can see plenty to install a note reader just not to remove it successfully. Very strange, the loom is all one piece with the square block to the vend bus connector and other to the coin mech am I missing something here for the machine to realise no note acceptor connected? Or is it just programmed like this from factory and I should forget about it. I just don't like being beaten lol

#9 fruitsnappa

fruitsnappa

    Part of the furniture

  • Regulars
  • 1304 posts

Posted 04 June 2019 - 06:19 AM

Can't help with £5 float levels sorry. £250 could well be right. Have a look in downloads for any £5/mpu5 manual, should be generic.


Edited by fruitsnappa, 04 June 2019 - 06:19 AM.


#10 adaptle

adaptle

    Newbie

  • New Members
  • 6 posts

Posted 04 June 2019 - 07:00 AM

It's on a prize switch. Will try changing that back to £70 tonight and see if that adjusts to 125.

#11 spa

spa

    Layout Designer

  • Moderators
  • 2494 posts

Posted 04 June 2019 - 06:47 PM

Can't you just chuck £50 into the hopper and press top up if a smaller float is all you need?


http://www.youtube.com/FruitVideos - My youtube channel

 

https://drive.google...&usp=drive_link - My Drive

 

 

 

 

 


#12 fruitsnappa

fruitsnappa

    Part of the furniture

  • Regulars
  • 1304 posts

Posted 04 June 2019 - 07:29 PM

£70 wont go any lower than £250(it sets itself, with or without note acceptor). If your sure it's set at 10p/£5 £250 may be the correct level. Does sound high for that stake/jackpot though.



#13 robinhood75

robinhood75

    medieval mentalist

  • Gold Supporters
  • 562 posts

Posted 05 June 2019 - 03:15 PM

They do a £70 x's 3 wow never seen it before dell. 

The max float on my £70 reflex is £350 with notey\ £250 without, it needs this amount for when it does the £210
i.e £70 repeat x 3


What's yours is yours and what's hers is yours




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users