5 replies to this topic

[MachineAddict]

I'm using the MFME emu and for the life of me can't get it to fit to my 20 inch monitor without the entire right side and the reels being totally hidden. Right now I have loaded Ten Ten Do it Again and can onle see the wheel at the top and half the text of the marquee on the right.

Any help would be appreciated.

[hurtand165]

Try this and if it does not help post here again.

http://www.fruit-emu...read.php?t=3264


That is an article in the knowledgebase, it may be worth you reading through a few of those topics. Actually it would help all newbies.


Hurtand165

[dtrmad2004]

what have you got your screen resolution set to, for the emus its best to have it set to 1280x1024. right click on blank part of desktop click properties then the display tab and slide the slider to 1280x1024 and apply the changes

Andy

[MachineAddict]

Thanks for the help. 2 mins after posting I changed the desktop to 1280x 1024 and all is fine. It didn't even dawn on me till after I posted and then ran a search. Stupid me. So anxious to play I wasn't patient

[dtrmad2004]

no problems even the best of us get stuck sometimes

Andy

[hurtand165]

Thanks for the help. 2 mins after posting I changed the desktop to 1280x 1024 and all is fine. It didn't even dawn on me till after I posted and then ran a search. Stupid me. So anxious to play I wasn't patient

Don't forget to read the articles in the knowledge base, you would be surprised how many common problems are covered there. You will also be surprised by the amount of people who just don't bother looking there to find an answer.


Hurtand165