11 replies to this topic

[romx]

i noticed a couple of non needed lights did not work on the machine when i got it
i linked 2 lights up together that was on at the same time anyway (coin slots)
shortly after i noticed that about 4 lights no longer go on and off in the sequence they should do ie top left corner of feature board

anyone got any ideas whats wrong and how to fix it ????


romx

[captainhaddock]

Hi, The lampholder probably has a diode built in,you may have got the wires linked the wrong way round.

Dave.

[lincs1]

i noticed a couple of non needed lights did not work on the machine when i got it
i linked 2 lights up together that was on at the same time anyway (coin slots)
shortly after i noticed that about 4 lights no longer go on and off in the sequence they should do ie top left corner of feature board

anyone got any ideas whats wrong and how to fix it ????


romx

the best thing is romx if u don't know what your doing then don't mess with the machine. the chances are that u av blown a diode on the lampholder. to which causes a few lamps to light when they shouldn't do.

[skabaz]

yeah you may also have buggered the lamps and switches board (the one that is at the top of the cabinet hanging below the top glass.

baz

[romx]

the best thing is romx if u don't know what your doing then don't mess with the machine. the chances are that u av blown a diode on the lampholder. to which causes a few lamps to light when they shouldn't do.

any idea where theese ones are located i can test them and replace but it might help if you can point me in the right direction

romx

[romx]

thinking about the machine since i bought it
we noticed that bulbs kept going quite quick plus the machine didnt start right up very often
ive come to the conclusion there is a problem on this board
(i tried to change the lampholders and same thing)

anyone know where i can get a new board and the price for a replacement ?


romx

Attached Files

•  lampboard.jpg   67.02KB   53 downloads

[lincs1]

thinking about the machine since i bought it
we noticed that bulbs kept going quite quick plus the machine didnt start right up very often
ive come to the conclusion there is a problem on this board
(i tried to change the lampholders and same thing)

anyone know where i can get a new board and the price for a replacement ?


romx

yes i know where you can get 1 from. ME....LOL arn't u lucky
the board is all in working order, FULLY TESTED BY MYSELF

i stripped a duff beer guide and they are listed on ebay at the moment

if u pm me romx i'll give u the details.

lincsleisure1

[romx]

yes i know where you can get 1 from. ME....LOL arn't u lucky
the board is all in working order, FULLY TESTED BY MYSELF

i stripped a duff beer guide and they are listed on ebay at the moment

if u pm me romx i'll give u the details.

lincsleisure1

as usually lincsleisure1 comes to my rescue
i will sort something out with you from the pm when im done with a job

thanks a lot

romx

[NickYerPesos]

is it just the machine that keeps blowing it bulbs, cause there is an OLD homers meltdown in an old quasar type place and about 15 bulbs r out...
is it a problem to do with Bcrest doin shitty boards or summit.

[romx]

is it just the machine that keeps blowing it bulbs, cause there is an OLD homers meltdown in an old quasar type place and about 15 bulbs r out...
is it a problem to do with Bcrest doin shitty boards or summit.

not just the bulbs blowing 4 bulbs dont flicker or turn off in the sequence theyre supposed too they just stay lit all the time
but before it did that yeah about 15 bulbs went in 2 days


romx

[impact]

not be funny nick but you will probley find that is is still global or revolutions who are doing the spares and repairs as time is near when the global stop using the epoch rubbish but they will be making machines using the scorpion 4 tech very soon

Baz have you had any thing yet from global using the scorpion 4 gear we are due but nother as of yet mate

[skabaz]

not had anything yet on the global side of things with scorpion 4 but we have had a few voodoo games machines on scorpion 4 which i now beleive are the same company.

baz