Yeah but seems a shame to scrap lincs :¬(
If you could have a look for me Baz I would appreciate it. I'll give the battery a go.. but like u say an new board maybe the case.
21 replies to this topic
#21
Dafish
-
- New Members
- 43 posts
Expert in the training
Posted 15 October 2005 - 07:44 AM
-------------
Machines I Own:
QPS/Bell Fruit Fast Fruit
Pachislo - Austin Powers
Pachinko - Yellow Cab
Maygay Monopoly Deluxe (Broken
....)
Machines I have owned:
Bell Fruit Who Wants To Be A Legionaire?
Maygay London Underground
Barcrest Club TrailBlazer
BWB Clown In Around
Machines I Own:
QPS/Bell Fruit Fast Fruit
Pachislo - Austin Powers
Pachinko - Yellow Cab
Maygay Monopoly Deluxe (Broken
....)Machines I have owned:
Bell Fruit Who Wants To Be A Legionaire?
Maygay London Underground
Barcrest Club TrailBlazer
BWB Clown In Around
#22
CBDSonline
-
- New Members
- 17 posts
Junior Member
Posted 15 July 2006 - 11:53 PM
Have you managed to get it sorted ??
i just bought an apollo 9 that was faulty. all lights on apart from 12v +
Checked all fuses tested all connections but still the same.
Wipped the psu out and sat it on the bench and reworked all solder joints. All the voltages were correct comming from the main coil. as u say 11v from the 12v line... check the wires to and from each fues holder . Bang there was a bad connection on the fuseholder on the 12v line. all the solder looked good but there was a fault in the fuse holder and the cable going to it.. Just salvaged it from the scrap heap. hope it might help you a bit with getting your machine running again.
i just bought an apollo 9 that was faulty. all lights on apart from 12v +
Checked all fuses tested all connections but still the same.
Wipped the psu out and sat it on the bench and reworked all solder joints. All the voltages were correct comming from the main coil. as u say 11v from the 12v line... check the wires to and from each fues holder . Bang there was a bad connection on the fuseholder on the 12v line. all the solder looked good but there was a fault in the fuse holder and the cable going to it.. Just salvaged it from the scrap heap. hope it might help you a bit with getting your machine running again.
A Freeplay ebay nudger just dont have the same buzz cos no coins come out when u hit the jackpot
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
