Thanks to a member on Ebay and a few questions and answers he recomended a site for the Repair and upgrade of my coin validator or Validater (cant be botherd to look the correct speling up at the mo)
I hope the board admin dont mind and external link to the place i HOPE will bring a lot of members new and old some joy when it comes to Coin Mech problems.
http://www.eurocoin....nValidators.pdf
Ther can repair and upgrade Mars Electronics. Money Controls. Azkoyen and NRI Validators
Enjoy
Chris
4 replies to this topic
#1
CBDSonline
-
- New Members
- 17 posts
Junior Member
Posted 02 May 2006 - 04:03 PM
A Freeplay ebay nudger just dont have the same buzz cos no coins come out when u hit the jackpot
#2
impact
-
- Regulars
-
- 1280 posts
Error 9.4
Posted 02 May 2006 - 05:21 PM
let me tell you about blinking e service there as much use as a ash tray on a motor bike
nv10 firm ware updates stuff that cheaper if we do it
mpu5 repairs still not repaired
pluto6 mpu still not repaired
impact mpu with a unknown error still with an unknow error when came back
sr5 firmware or unknown tech line when put back into a horizon machine for get it send it back to coincontrols
uplus azkoyen serial hoppers send back to bfg/bfm for a replacement
would you send any of your gear to them y/n ? no
relie on tech help y/n ? no
would you be better off repairing it your self or sending it back to the company that made it y/n ? yes
nv10 firm ware updates stuff that cheaper if we do it
mpu5 repairs still not repaired
pluto6 mpu still not repaired
impact mpu with a unknown error still with an unknow error when came back
sr5 firmware or unknown tech line when put back into a horizon machine for get it send it back to coincontrols
uplus azkoyen serial hoppers send back to bfg/bfm for a replacement
would you send any of your gear to them y/n ? no
relie on tech help y/n ? no
would you be better off repairing it your self or sending it back to the company that made it y/n ? yes
#3
skabaz
-
- New Members
-
- 2778 posts
Engineer of the World
Posted 02 May 2006 - 06:32 PM
totally agree with you impact!!!!
we have sent arount 50 sr5 and cashflow serial and parrallel coin mechs for repair and reprogramme and about 2 thirds have came back with exactly the same faults.
the problem is there isn't many places to send your coin mechs for repair after the warrenty has gone.
and they even charge you the full repair price when obviously they haven't even checked it!!!!
baz
we have sent arount 50 sr5 and cashflow serial and parrallel coin mechs for repair and reprogramme and about 2 thirds have came back with exactly the same faults.
the problem is there isn't many places to send your coin mechs for repair after the warrenty has gone.
and they even charge you the full repair price when obviously they haven't even checked it!!!!
baz
#4
CBDSonline
-
- New Members
- 17 posts
Junior Member
Posted 02 May 2006 - 08:04 PM
Thanks guys. Saved me £15.00 for a reprograming of my MS115. The guy from ebay says they were good.. should have asked here first. Maybe this should be a sticky to warn others off. There again for a one off reprogramming how bad could they make it.
A Freeplay ebay nudger just dont have the same buzz cos no coins come out when u hit the jackpot
#5
ady
-
- Moderators
-
- 14204 posts
The furniture
Posted 03 May 2006 - 10:11 AM
Thanks guys. Saved me £15.00 for a reprograming of my MS115. The guy from ebay says they were good.. should have asked here first. Maybe this should be a sticky to warn others off. There again for a one off reprogramming how bad could they make it.
If we were to 'sticky' all the good advice post's given they wouldn't really stand out.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
