Can anyone help me with the following problem please? I have just changed the 3.6 v battery on the board and my fruity is stating "Checking Rom" and has been for the past hour.
Do I have a major problem? Any suggestions at all would be most appreciated.
Kindest regards
John
10 replies to this topic
#2
Bagsy66
-
- New Members
- 9 posts
Junior Member
Posted 25 May 2006 - 11:02 AM
Can anyone help me with the following problem please? I have just changed the 3.6 v battery on the board and my fruity is stating "Checking Rom" and has been for the past hour.
Do I have a major problem? Any suggestions at all would be most appreciated.
Kindest regards
John
Now I have only flashing lights (Not the holds/Nudge or cancel)
#3
lincs1
-
- Banned
-
- 3803 posts
He Who Dares Wins
Posted 25 May 2006 - 11:58 AM
Now I have only flashing lights (Not the holds/Nudge or cancel)
was the old battery leaking??? if the battery was leaking then its possible the acid has got into the tracks of the pcb
also make sure the battery was soldered into place properly. and if you removed the board then make sure all connections are connected as they was b4 u disconnected them.
hope this helps
linc's
#4
Bagsy66
-
- New Members
- 9 posts
Junior Member
Posted 25 May 2006 - 12:39 PM
I have re-inserted the battery and now the machine lets off a quick siren sound and then beeps!!
Any suggestions
Thanks
John
Any suggestions
Thanks
John
#5
lincs1
-
- Banned
-
- 3803 posts
He Who Dares Wins
Posted 25 May 2006 - 01:30 PM
I have re-inserted the battery and now the machine lets off a quick siren sound and then beeps!!
Any suggestions
Thanks
John
when the siren sounds it sounds like the ram is cleared now the beeping!! what message does it give on the display? does it give a message??
linc's
#6
Bagsy66
-
- New Members
- 9 posts
Junior Member
Posted 25 May 2006 - 01:46 PM
System error 92!
Thanks for your replies
John
Thanks for your replies
John
#7
lincs1
-
- Banned
-
- 3803 posts
He Who Dares Wins
Posted 25 May 2006 - 02:08 PM
System error 92!
Thanks for your replies
John
is there an error code listing guide inside the back door of the machine? reason being i cannot think off hand what that code 92 is. bazpeep may know as he will have manuals in his workshop with bfm error codes.
lincs
#8
Guest_DAD_*
Guest_DAD_*
-
- Guests
Posted 25 May 2006 - 02:13 PM
According to the system manual, error 92 is a Clock error:
92 Clock error 2 - Clock fitted but not required. Remove clock board and return to Bellfruit Commercial Department.
DAD
92 Clock error 2 - Clock fitted but not required. Remove clock board and return to Bellfruit Commercial Department.
DAD
#9
Bagsy66
-
- New Members
- 9 posts
Junior Member
Posted 25 May 2006 - 02:19 PM
Many thanks DAD.....Can you please tell me where the clock board is located?
John
John
#10
Guest_DAD_*
Guest_DAD_*
-
- Guests
Posted 25 May 2006 - 02:23 PM
Erm NO lol...
... but you can download the service manual (pdf) from my site - located in the downloads module. You'll need to register 1st mind you
DAD
... but you can download the service manual (pdf) from my site - located in the downloads module. You'll need to register 1st mind you
DAD
#11
ady
-
- Moderators
-
- 14204 posts
The furniture
Posted 25 May 2006 - 03:04 PM
Erm NO lol...
... but you can download the service manual (pdf) from my site - located in the downloads module. You'll need to register 1st mind you
DAD
(this isn't in reply to Bagsy66, just a general thought)
And then participate in the forums....not just go there to leech
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
