4 replies to this topic

[Chriswuk]

Hi guys,

I've recently purchased a machine titled "Beaver Las Vegas", but I'm stuck on finding a manual for it.

Can anyone point me in the right direction to one ?

When you insert a coin, it goes straight into the cash box, bypassing the hopper, even if empty. I need to know how to change this so the cash fills up the hoppers.

Many Thanks

Chris

[skabaz]

hellomate

what you need to do is the following...

open up the bottom cash doors and inside the cashbox you will see a green round button which is called the hopper dump button.

switch the machine on and let it power up,turn the refill key so the machine goes into refill mode,push and hold the hopper dump button until the machine goes into hopper dump mode and then press the start button.the machine will then try to pay out from the hopper.once the machine has tried to pay out coins the hopper will then read as empty.

close all doors and try a £1 coin and see if it goe's into the hopper.

baz

[Chriswuk]

Hi Baz,


Thats what my mate told me to try last night.

If I have previously filled the hoppers manually, it will dump them into the payout box. But on resetting the machine, any £1's I put in via the coin mech will still go straight through into the cash box - totally bypassing the hoppers !!

I found the manual for the machine after much searching

http://www.workingho...aver Casino.pdf

I just need to nkow what I need to change to enable the hoppers to fill up without it bypassing to the cash box.

Thanks again

[skabaz]

when you turn the refill key how many coins are showing in the hopper?

also double check that all plugs that push into the coin mech are in correctly and arn't missing any pins.

baz

[Chriswuk]

Hi Baz,

The hopper shows the correct amount of coins in it.

Had a good look at the coin mech last night, making sure everything is plugged in alright & everything is ok.


Do you think it could be a setting on the main board ? I looked at the machine in test mode last night, and tried tunring the diverter on/off (didn't seem to affect anything).

It's driving me mad now !!!

Thanks for the help so far mate