29 replies to this topic

[skabaz]

yeah i'm a service engineer up here in scotland.

glad you are now sorted.

anything else you need just let me know thats what i'm here for.

baz

[paulpdh]

Well there is one other problem, the front of the machine does not close properly, I think it needs a new facia panel across the top. There is a little bit of plastic cracked on the left hand side.

[skabaz]

this style of cabinet is not made anymore unfortunatly so the only way to get a replacement would be on ebay.

sorry matey

baz

[paulpdh]

Thanks for that Baz

It seems that the top door doesnt meet the cabinet properly, it has a 3/4 inch gap opening. I will have another look...

Anyway hang loose bro, and thanks for the advice again......

Rgds

Paul

[paulpdh]

Could anyone advise me how to change the bulb under the collect button?? I dont want t force it and break it.

Many thanks

Rgds

Paul

[skabaz]

open top door and just ease the whole switch assembly out from the button holder and then you will get access to the bulb.you have to ease it out at the left hand side and then the right hand side,dont try and pull the both sides at once.

baz

[paulpdh]

Many thanks you are right again Baz

[Chipydip]

Hi all,

I too have purchased the Italian Job club machine recently, and would like some assistance if possible.

The machine is working fine, however once it pays jackpot (10p / £100jp) it will not give a win of any kind until at least £40-£60 has been played afterwards - which makes for some very boring play.

I am no expert, but am hoping that there may be a way (switches?) of altering the way the machine plays. It has also never given a bonus greater than 'extra feature' from the banked bonuses gained on the board, from over £1000 being played through it now!!!

The machine inside has 2 banks of 8 dip switches. The second bank (these are arranged vertically - this one is at the top) alters the percentage payout, but can anyone inform me what the first bank does??? Currently, on the first bank, all switches are set to off/down.

If anyone has a manual for this machine that they are willing to photocopy/email to me i'd be very grateful - and even pay for it!

Otherwise, if anyone knows of what the dip switch settings are, or of other switches the machine may have which could alter play, your help will be very much appreciated.

Regards,

Dan.

[Jamesbond_007838]

Make the percentage payout higher

(There should be a variable key for percentage, if not you can buy one for pence)

[Chipydip]

Ive used the 2nd set of 8 switches to up the %age to 80% - i just hoped there was something i could do with the first set of 8 to enhance gameplay. If not, it would be handy to know what these 8 do anyway.......can anyone help???