Jump to content


Photo
- - - - -

maygay/bwb simpsons m1b machine help


  • Please log in to reply
9 replies to this topic

#1 thegr8oneisnumber1

thegr8oneisnumber1

    Newbie

  • New Members
  • 18 posts

Posted 28 September 2006 - 07:47 PM

hi everyone first post so be kind please lol
i wonder if i could ask for some help i hope i am in the right section
i have the above machine but it has a problem when you switch on the machine the power supply humms and there is only one light on the mother board and it will not boot up or power the lights any help would be appricated as i would love to get it going again many thanks

#2 Jimbob219

Jimbob219

    Member

  • New Members
  • Pip
  • 358 posts

Posted 28 September 2006 - 09:05 PM

Which simpsons machine is it?

#3 Bencrest

Bencrest

    The furniture

  • New Members
  • PipPipPipPipPip
  • 7446 posts

Posted 28 September 2006 - 09:07 PM

If it's Maygay / BWB it's an emulated one I believe, M1A or M1B.

Just called 'The Simpsons', it isn't Homers Meltdown or Duff Beer Guide.
Ben
 
Hopefully recovering from years of compulsive gambling and wanting to be gamble free forever.
 
Recommended reading - http://www.gamblersaloud.com/ (yes, I bought the book, very happy with it!)

#4 thegr8oneisnumber1

thegr8oneisnumber1

    Newbie

  • New Members
  • 18 posts

Posted 28 September 2006 - 09:17 PM

yes its the very first one joint venture i think has anyone got any ideas what it could be ive checked fuses and the connections but no joy

#5 Jimbob219

Jimbob219

    Member

  • New Members
  • Pip
  • 358 posts

Posted 29 September 2006 - 02:34 PM

Mine used to do this, but after a while it just went away.

So it might go away after a while, but someone on here will be able to tell you what to do ;)

#6 6030538

6030538

    Junior Member

  • New Members
  • 8 posts

Posted 09 January 2008 - 02:14 PM

From my experience, you need a new mother board. Ebay around £20-£30.

6030538

#7 stanmarsh14

stanmarsh14

    Sado-masochist

  • Gold Supporters
  • 3120 posts

Posted 09 January 2008 - 03:01 PM

hi everyone first post so be kind please lol
i wonder if i could ask for some help i hope i am in the right section
i have the above machine but it has a problem when you switch on the machine the power supply humms and there is only one light on the mother board and it will not boot up or power the lights any help would be appricated as i would love to get it going again many thanks


Looking at this and noting what you have, the PSU's quite often fail on these... However, I feel you will be best off asking the same question @ The Mecca, where there are a number of tech minded folk, who are better placed to assist you with this: The MPU Mecca

#8 Guitar

Guitar

    Project Amber Developer

  • Layout Creator
  • PipPipPipPipPip
  • 2989 posts

Posted 09 January 2008 - 05:13 PM

When you first turn on the machine you should get 2 LED's to indicate power status. Then if the cpu boots up the third power led should come on.

The fact you only have 1 led would suggest that you only have 1 power sorce getting to the board. If the fuses are ok I would suggest that it could be a psu problem.

There is a battery on the motherboard (you will need to remove the plastic case lid), if that leaks it can cause all sorts of errors. If the battery has leaked then you need to either find someone goos at electronics, or a new system board.

Check the battery first. If its not leaked I would suggest the PSU is at fault.

Project Amber 2 - Coming Soon


#9 skabaz

skabaz

    Engineer of the World

  • New Members
  • PipPipPipPipPip
  • 2778 posts

Posted 09 January 2008 - 05:37 PM

this thread is over a year old guys:0

baz

#10 Guitar

Guitar

    Project Amber Developer

  • Layout Creator
  • PipPipPipPipPip
  • 2989 posts

Posted 09 January 2008 - 06:45 PM

this thread is over a year old guys:0

baz


Ok I honestly didn't notice that. Very observant of you, just testing you.

Project Amber 2 - Coming Soon





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users