Hi
I have just got a JPM eachway nudger MK2 and ther is no manual or personality pack with it. Is ther any place I can down load these as I need the test procedure for the machine.
Thanks
Jonski
6 replies to this topic
#2
skabaz
-
- New Members
-
- 2778 posts
Engineer of the World
Posted 23 November 2006 - 10:39 PM
i think to put the machine into test you have to put the last switch on the switch bank on the mpu to the on position.
i'm not 100% as its been ages since i worked on one of these.
baz
i'm not 100% as its been ages since i worked on one of these.
baz
#3
decaff
-
- New Members
-
- 174 posts
Two-Armed Bandit Player
Posted 23 November 2006 - 11:43 PM
Oh, you lucky bugger, £21 and I was sorely tempted to have a punt at that one myself (being just the other side of the Solent); you must be really pleased with the result!
Here's the best place to ask for the info you want (this site is dedicated to the great old machines; not the modern crap). If anyone will have the document you want, it'll be here:
http://www.fruitemu.co.uk/
You might also want to peruse this area of the Resources section The MPU Mecca while you're there; couldn't see an EWN Mk2 manual but several other JPM manuals from the same era (ish); might just contain common information but your best bet is to post a similar request that you've posted here!
Here's the best place to ask for the info you want (this site is dedicated to the great old machines; not the modern crap). If anyone will have the document you want, it'll be here:
http://www.fruitemu.co.uk/
You might also want to peruse this area of the Resources section The MPU Mecca while you're there; couldn't see an EWN Mk2 manual but several other JPM manuals from the same era (ish); might just contain common information but your best bet is to post a similar request that you've posted here!
#4
jonski99
-
- New Members
- 4 posts
Junior Member
Posted 24 November 2006 - 08:08 AM
Thanks for your help - I was lucky to get it for £21. It makes a change to be on the right side of the solent 
I am not able to access the The MPU Mecca or register - keep getting a message "Sorry, registration has been disabled by the administrator".
I am not able to access the The MPU Mecca or register - keep getting a message "Sorry, registration has been disabled by the administrator".
#5
lincs1
-
- Banned
-
- 3803 posts
He Who Dares Wins
Posted 24 November 2006 - 10:36 AM
i think to put the machine into test you have to put the last switch on the switch bank on the mpu to the on position.
i'm not 100% as its been ages since i worked on one of these.
baz
that is correct baz it is the last dip switch on the mps2 board to put it into test mode
lincsleisure1
#7
TTX
-
- Regulars
-
- 223 posts
Castle Collector
Posted 24 November 2006 - 11:17 PM
Toggle dip switch 8 (lower bank on MPS2).
Lamps go out, all leds show 8's.
Press start, credit should show 1.
Use holds 1 & 3 to step through the test numbers.
Use start or hold 2 to select a test:
1 = percentage check and change
2 = lamps
3 = leds, meters, solenoids
4 = reels
5 = switches
6,7,8,9 = individual solenoid
Press start or hold 2 again to advance to next test.
Press cancel to exit test mode.
This will work for most MPS machines running JPM games.
Lamps go out, all leds show 8's.
Press start, credit should show 1.
Use holds 1 & 3 to step through the test numbers.
Use start or hold 2 to select a test:
1 = percentage check and change
2 = lamps
3 = leds, meters, solenoids
4 = reels
5 = switches
6,7,8,9 = individual solenoid
Press start or hold 2 again to advance to next test.
Press cancel to exit test mode.
This will work for most MPS machines running JPM games.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
