6 replies to this topic

[zeeny99999]

Im probably being a numpty but cant get my Global HURRICAINE into test mode.

I do as the manual says, open the top door, press the red 'test' button on the hopper and the button on the MPU board at the same time, nothing happens !!

Ive also tried it with the refill key in, and with the bottom door open.

it's driving me nuts !

What am I doing wrong ?

[lincs1]

Im probably being a numpty but cant get my Global HURRICAINE into test mode.

I do as the manual says, open the top door, press the red 'test' button on the hopper and the button on the MPU board at the same time, nothing happens !!

Ive also tried it with the refill key in, and with the bottom door open.

it's driving me nuts !

What am I doing wrong ?

keep the button pressed on the mpu while pressing the red button on the hopper



lincsleisure1

[NickYerPesos]

erm... i havnt had my machine for a fair few months, and im not sure if i got the same hopper (system) etc, but isnt the test button "Green"

Im very sure mine was

Nick

[cyberface]

green button is hopper top up.

[NickYerPesos]

ahhh.. yeh i wasnt 100%, sumthing was just saying it may be green.. like i said its bin a few months since i had mine.

Nick

[lincs1]

lost the plot ere do u what do u want? test? or hopper top up???

green is topup n red button is test

its simple

[mikey95]

when you open the machine there will be 2 buttons in front of you on the hopper.The green one is for telling the machine that it is full (with the refill key in) the red button should be pressed and held in with the test button for a few seconds to put the machine into test.
If it won't go into test then it might mean that you have a faulty door switch (the white switches on the upper and lower doors)
You can check these by metering them for continuity or replacing