Jump to content


Photo
- - - - -

Hopper problem


  • Please log in to reply
18 replies to this topic

#1 twmitch

twmitch

    Junior Member

  • New Members
  • 10 posts

Posted 19 February 2007 - 08:48 PM

My hopper is not refilling. When it pays out money still goes down into the box. I don't have a clue??

Barcrest Frenzy

#2 ady

ady

    The furniture

  • Moderators
  • 14204 posts

Posted 19 February 2007 - 09:05 PM

My hopper is not refilling. When it pays out money still goes down into the box. I don't have a clue??

Barcrest Frenzy


Not having a lot of luck really on this One........4 threads the same problem.

It may help the guy's that can help you if you add to the previous One, past suggestions can be eliminated and they can also see what youl've been advised before.

#3 Fogg

Fogg

    Junior Member

  • New Members
  • 15 posts

Posted 19 February 2007 - 10:22 PM

Could this be a coin mech sorter routing problem? Maybe the engs have seen this before? (Baz, et al) I would look at my routing plug for starters...or possibly the sorter flap is sticking - needs a clean (I have an Addams Family with a C435A mech)

#4 ziggy

ziggy

    Member

  • Regulars
  • 662 posts

Posted 20 February 2007 - 12:01 AM

Was playing a Space Raiders today which was doing the same.Hopper was £26 light and all the coins were going to the cashbox.Collected £40 from the bank and got an i.o.u for £32.

Funny thing was the manager tried to refill it via the refill key, but all the coins were STILL going into the cashbox ,so i couldnt get the money from the machine,was going to try and explain the problem but gave up.

Still got the readys though.

#5 skabaz

skabaz

    Engineer of the World

  • New Members
  • PipPipPipPipPip
  • 2778 posts

Posted 20 February 2007 - 11:14 AM

if you have already checked that all plugs are plugged in properly on the coin mech then it looks like you have a faulty coin mech.

what type is it and i'll see if i can get one for you.

baz

#6 PLAYER

PLAYER

    Member

  • Regulars
  • 112 posts

Posted 20 February 2007 - 11:46 AM

if you have already checked that all plugs are plugged in properly on the coin mech then it looks like you have a faulty coin mech.

what type is it and i'll see if i can get one for you.

baz


As stupid as it may seem try shorting the battery out (make sure the machine is off) A corrupt RAM can do all sorts of silly things. Had this a few times. If it's still playing up check the following

That the divert plug is plugged in (It's the 9 way plug)

That it has a routing plug (all coins will go down default paths if not) This being a 22 way

Lastly assuming you have checked all the above correctly, check to see that the solonoid bolds are in in the seperator (this is the thing with the moving flaps) This really is a last resort but i have come across this before. Came fully working off a licenced seller, bag of shit!

#7 twmitch

twmitch

    Junior Member

  • New Members
  • 10 posts

Posted 21 February 2007 - 09:24 AM

One of the plugs was upside down, bent one of the terminals. This also in 'perfect working order', from seller.

Now I think I need a new fill-lock I can't get the meters up, I also want to change the volume, it's LOUD!

#8 PLAYER

PLAYER

    Member

  • Regulars
  • 112 posts

Posted 21 February 2007 - 10:40 AM

One of the plugs was upside down, bent one of the terminals. This also in 'perfect working order', from seller.

Now I think I need a new fill-lock I can't get the meters up, I also want to change the volume, it's LOUD!


If it's a Barcrest i think you have to hold the 2nd hold down before turning the key to get into vol control? Have a play about with it. Also check to see if the licenced seller has missed one of the terminals that may be hanging off one of the refill lock tabs. Licenced seller, licenced #@#@#@#!!!

#9 Fogg

Fogg

    Junior Member

  • New Members
  • 15 posts

Posted 21 February 2007 - 05:31 PM

Check the switch for operation - disconnect it first, then use a buzzer or battery/bulb/bits of wire to see if its switching. Then check that the wires are properly seated in the back of the push-on connectors (they are usually IDC types that displace the insulation - prone to pull out sometimes) prove this if you have a meter, check across the connectors with the machine on, there should be a voltage present if connectors OK.

#10 twmitch

twmitch

    Junior Member

  • New Members
  • 10 posts

Posted 21 February 2007 - 11:04 PM

Some wire has come loose, now the thing works properly. I bought it for £60, now it looks great. Any profit you think? I already want another one!

#11 twmitch

twmitch

    Junior Member

  • New Members
  • 10 posts

Posted 22 February 2007 - 12:22 AM

Plus how do I change Play and % I have stickers for 20p play 80%, and 30p and 70%?

#12 twmitch

twmitch

    Junior Member

  • New Members
  • 10 posts

Posted 22 February 2007 - 10:23 AM

Sorry! Barcrest MPU5 (Frenzy)

#13 PLAYER

PLAYER

    Member

  • Regulars
  • 112 posts

Posted 22 February 2007 - 10:36 AM

Plus how do I change Play and % I have stickers for 20p play 80%, and 30p and 70%?


With a percentage and jackpot keys. They plug onto the program card.

#14 twmitch

twmitch

    Junior Member

  • New Members
  • 10 posts

Posted 22 February 2007 - 01:09 PM

So I need to purchase a key, do the switches not do anything?

#15 Taylor525

Taylor525

    Owner and Parts Seller

  • Regulars
  • 508 posts

Posted 22 February 2007 - 01:23 PM

So I need to purchase a key, do the switches not do anything?


the swiches only change the game play, and how the machine is opperated, like if it pays out after a win, instead of banking it (i hate that lol) i think u need a key, u should have one with it, shouldnt ya?

#16 twmitch

twmitch

    Junior Member

  • New Members
  • 10 posts

Posted 22 February 2007 - 01:29 PM

I have a green key and a black key, and it is set on £15 JP 20p play 80% payout.

It's just it has stickers for 30p play and 70% payout, must just have been left in the machine at some point.

Thanks

#17 Taylor525

Taylor525

    Owner and Parts Seller

  • Regulars
  • 508 posts

Posted 22 February 2007 - 01:32 PM

ahhhh rite, dont forget to change them lol

#18 PLAYER

PLAYER

    Member

  • Regulars
  • 112 posts

Posted 22 February 2007 - 02:19 PM

I have a green key and a black key, and it is set on £15 JP 20p play 80% payout.

It's just it has stickers for 30p play and 70% payout, must just have been left in the machine at some point.

Thanks


You won't be able to increase the jackpot without changing the ROM's. You can change the percentage from 70-98% I can supply you one of these no problem. Tell me what percentage you want via a PM and i'll pop you one in the post. ;)

#19 baldady

baldady

    Junior Member

  • New Members
  • 2 posts

Posted 23 February 2007 - 10:48 PM

have you tried dumping it and then refilling




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users