JAZZEE01

Anybody know where i can watch the boxing on the net free? Hatton Vs floyd

Been given a pc to look at which when switched on gives a single beep lasting around 3 secs then a 1 sec pause then another 3 sec beep & so on.

I guessed mem or gfx but they work fine in another pc. Tried removing mem,gfx & drives & still get the same beep code.

I looked it up to double check & apparently there are many different award bios beep codes. I have never experienced such a beep code unsolved & have worked with pc's for many yrs.

I am left with 2 possibilities, 1= psu 2= mobo. I very much doubt it is the cpu.

The board is an MSI k8n neo ver 2

Anybody had this beep code without it being a gfx or mem prob?

cheers

I have a coronation street club fruit machine and i was in test mode so i could empty the tubes.The tube started emptying by holding the appropriate hold button then all of a sudden it stopped.None of the hold buttons were triggering to release coins.The hold buttons lit as i pressed them but no coins released.I then thought maybe a coin jam so went in the back while still in test mode and pulled the spring to release a coin from the tube.This is when the machine done a noise sort of the same noise as when you switch the machine on & all the lights went out.Now the machine will switch on but all that happens mis the odd light will blink in various places (seems to be near the number reel ,the odd other reel,the cancel button.
1 thing i noticed is that the motherboard has 6 red LED lights going down and 3 across ,all light up when switching the machine on except the centre LED of the 3 (the 6 light up but the 3 leds on 2 do)
I'm sure somebody out there knows the problem from experience but me being totally clueless needs help from those in the know.So i would appreciate the help very much.

Thanks
Jazz

I bought a coronation street club fruit machine and all was well then i put a 50p in a 20p and a 10p in and played the games off.I then opened the back and pressed the test mode button so i could empty some £1 coins so i could have a play.Now on the main screen where it shows the bank & credits....the credits part aint there only the bank amount at 000.It will still take £1 coins but wont register them and they drop straight to the tube without any plays registering.When i put in 50p or 20p or 10p they just drop straight through to the pay out try.Has anybody got any ideas what the problem is and how to sort it.
Also when it has been off a while and i switch it ojn i get a ram clear 42 message and i get a mega loud alarm like buzz (it does it 6 times then stops) then the reels spin and its ready to play.

i would appreciate it if anybody could help me with the 2 problems

Thanks
Jazz