Jump to content


pubclown

Member Since 19 Jun 2004
Offline Last Active May 11 2009 05:57 PM
-----

Posts I've Made

In Topic: Hopper question

21 March 2006 - 10:26 PM

Well it seems all ok to me.

Can you look me up a price for a replacement?

Thanks Baz

In Topic: Hopper question

21 March 2006 - 09:59 PM

if it still goes into the hopper then check that all the plugs are connected properly on the coin mech(big white plug at the side,small white plug should be pushed right in and missing no pins,this is the plug that controls when the £ coins should go into the hopper or cashbox).

baz


Right just had the coin mech out and unplugged it(2 plugs) One plug is fairly long and one is small with 2 wires comming out. They both plug into where the % and price per play chip go and the other end goes into the cash mech. Think one plug was called the coin divert plug? I think both sets of pins had one pin missing as the plugs both have one hole filled in(if that makes sense?) Put them back in and as I said before checked the big plug at the side of the hopper and still bugger all.

In Topic: Hopper question

21 March 2006 - 09:18 PM

SR 5, ring any bells?

In Topic: Hopper question

21 March 2006 - 09:05 PM

Thanks for the reply.

The Hopper reads 1 x 0 indicating it's topped up with the refil key turned.

Done this before, emptied the hopper and only put 125 back in. Topped it up with the switch and it just does the same thing, keep falling into the hopper.

I tried the big white connection, took it apart and clipped it back together again. Made sure it was on correctly. Still no difference. Money is still falling into the hopper:(

In Topic: Barcrest Ultimo on ebay

05 March 2006 - 12:32 PM

No but I work there.

His name is Kurt.