Jimbob219

Anybody know how much it'd cost (or if it is even possible) to get an extra plug socket fitted into a wall?

Thanks for any replies

First of all, thank you to everyone who has made a layout for mfme9.4.

Second of all, how do I make my screen resolution to 1280? Most machine, except for Temple of Treasure I downloaded are 1280, so how do I do it?

Thanks for any answers .

Edit: Found it, sorry.

Well, I don't know if you could call it a problem, but we'll see.

Well, here's the story for those who don't know:

About 6 months ago I bought a Club Psycho Cash Beast fruit machine off of Ebay for £230. Waited about 2 months for delivery, they finally deliver around October of last year. But not CPCP, they rang my mum up saying that when they were loading the machine into the lorry, they dropped it and smashed the glass on the front, and I could either wait until it was fixed, or get a Monty Pythons Flying Circus club fruit machine delivered the next morning, I chose for MPFCC.

So, that was delivered, I turn it on, and... "Hey! Check it out!", the alarm went off, with Pnd opto blocked on the screen, I asked on here for some help and looked in the manuel, and good old Bazpeep gave me some advice, which I've only just done, I found the circle inside the hopper unit, which I twisted round for about a minute, when 3 pound coins fell out. "Result!" I thought..

I tried putting the top back on the hopper unit, won't fit back on properly, I managed to get it on in the end, I then went to slide the hopper unit back in the machine, and it wouldn't fit.

So I now have a machine with it's top door open, and the hopper unit on the floor with the coin mech hanging out.

Any ideas why the hopper unit won't fit back in the machine?

Help would be MUCH appreciated,

Jimbob

Well, as some of you know I won an auction on ebay for a club psycho cash beast machine on the 5th of october. Well, last thursday my mum and i were getting frustrated so we sent a message, they replied with, send us your number and we'll get in touch.

Thursday afternoon, they rang saying we can deliver cpcb saturday morning, well, I thought that was great, this weekend I was going on holiday with my dad, so we went, before we even got there, I get a phone call from my mum saying they've looked at cpcb at it's broken, something to do with the glass. They said either wait for it to be fixed or switch to club monty python's flying circus, I went for cmpfc, saturday morning it came. They didn't even do a demonstration of the machine, and here's the conciquence.

About 30 minutes ago, I go to turn it on for the 1st time, it started off alright, until after the reels had span, an alarm went off, then it said pnd opto blocked, then tamper.

I got rather frustrated, so I had a quick look inside, I couldn't see much wrong with it but then again I'm no expert, or even close.

So I do need some advice, if anyone can help it'll be fantastic, I'll post everything it says if needed.

Thanks in advance,
Jimbob219

Lol, think this is an error.