Jump to content

  2. → Viewing Profile: Posts: Phillip Rooney

Phillip Rooney

Member Since 26 Nov 2011
Offline Last Active Dec 17 2012 07:12 PM
-----

Posts I've Made

In Topic: Barcrest Note Acceptor Wanted

05 December 2012 - 09:30 PM

Hi, all it will need is a metal face plate/surround to fit your cabinet be it a horizon or genesis, the note acceptor works just fine and it owes me a score (£20) you will get the JCM EBA22 note acceptor, loom and metal fascia included...  

 

OK, stupid question, does it have updated software on it to take the latest notes (Inc scottish notes) and if not, how do i get it programmed?

 

Where would I get one of these faceplates? It wont work without it?


In Topic: Barcrest Note Acceptor Wanted

04 December 2012 - 07:37 PM

Hi there I have a JCM EBA 22 note acceptor for sale including the bracket and loom, but unfortunately no face plate for the front of the cabinet. Let me know if you still need one, also have a spare blanking plate if anybody needs one.....

 

Hi Mate, does it need the faceplate to operate and how much do you need for it?

 

Cheers


In Topic: Barcrest Note Acceptor Wanted

01 December 2012 - 06:01 PM

Hi, does anyone have a JCM EBA 12 or 22 on serial for sale, including the bracket to hold it in place?

In Topic: Barcrest Note Acceptor Wanted

07 November 2012 - 10:12 AM

Cheers Guys.

I'm going to get a hold f a JCM note changer, apparently that's the model that was fitted on these, but I may need some sort of metal framework to go with it. I'll get the refill key off ebay, as I need to turn the volume down anyway, and I think I need the refill key to do that and I've got a hold of some camlocks.

There was a 78% key in the MPU board, and I removed it, so what would it default to?

Also: I got a "Gimmie Gimmie Gimmie" machine at the same time, there is a few parts missing from it, but could be good for someone for spares. If there is anyone near Glasgow or Ayrshire, they are welcome to pickup, first come first served, free of charge...

As far as I can tell there is at least one PCB missing from the top half of the machine, no coin mechanism, and undoubtedly other things missing too.

  1. Fruit-Emu
  2. → Viewing Profile: Posts: Phillip Rooney
  3. Privacy Policy
  4. Forum Rules ·