chris_newton

I'm not very technical.. is that hard to do? and is it expensive?

also is that definitely the fault?

I managed to get it back in, was trying to plug the cable into the wrong port! Doh!

tried a few in my machine, no joy, didnt think they would work but hey ho!

Coin mech sent off to be updated

Hiya

Yes we have until October to cash in our old £1 so plenty of time :-)

ok just to let you all know and anyone else who stumbles across this thread, i did it !

The 2 screws in the red circles pulled it away from the machine then on the back there is 2 screws diagonal to each other...i undid these and it pulls apart,(see photo)

I then replaced the battery CR2032 and then tried a reboot...i then had to do the following

Turn machine on with the up and down button pressed, press enter to get into self test, select test ram, it should give you a result, reboot machine. 

Then rebooted again and had to put date and time in then it came on and all working fine!

Many Thanks for all your help on here !