Jump to content

  2. → Viewing Profile: Posts: Fogg

Fogg

Member Since 26 Jan 2007
Offline Last Active Jul 05 2008 09:33 PM
-----

Posts I've Made

In Topic: prize stake dip settings

10 October 2007 - 09:55 PM

Try this m8 - it may help

In Topic: Barcrest Spice is Right manual

05 September 2007 - 09:27 PM

If thats required, i will get back to you on that (when i bought the machine it came with alternative graphics - whether or not they had been installed before, i dont know)- i would still need a manual to understand where to put it and set it up etc.
Do you have or know where i can get a manual/instruction
Regards
Lordrama

Are the Graphics you refer to, the different prize values displayed in the top/bottom glass - if they are, they have tabs on the ends, and slide out so you can replace them with the different ones to show the values that you have set up on the stake/jp key - just carefully pull them out and put the new ones in their place.

In Topic: Mario Kart 64 Advice!

29 August 2007 - 08:42 PM

Could I add that its strange that he has not had a question to ask or something to contribute in all that time - I have only been on here since early this year and in that time have asked stuff and also commented on stuff that I have experienced. I would also add that although I am fairly new to this field (though not to electronics type stuff) I have learned an awful lot from the guys on here (Baz, Impact, Lincs, Ady, etc. etc.)- directly or indirectly and am grateful for that and would always make that known.

Fogg

In Topic: IC Question

27 August 2007 - 09:40 PM

Thanks again for the info Impact - I will try the key settings as you suggest - the s/w is indeed Addams 0.3 as you said in your post, and the PSU is the Sanken SPSU in the New Genesis taller model (it was a pig to get in the house!!)
Cheers all
Fogg

In Topic: IC Question

27 August 2007 - 05:44 PM

Cheers Impact - I have all the decals to run at £8/£15/£25 - would I need to use this PIC to run at 15 or 25 (presumably in place of the 10BC25 on the program card) or would it run just using the correct stake/jp key?

TIA
Fogg

  1. Fruit-Emu
  2. → Viewing Profile: Posts: Fogg
  3. Privacy Policy
  4. Forum Rules ·