Jump to content


Emmalou

Member Since 12 Nov 2012
Offline Last Active Nov 25 2012 02:18 PM
-----

Posts I've Made

In Topic: Complete Novice Help

22 November 2012 - 04:15 PM

I've found one but will work out about £50 :( but will take me a long time to save that amount up to fix it. So gotta store it til then :( x

In Topic: Complete Novice Help

21 November 2012 - 01:00 PM

I got given the machine for free n not sure how much I'd like to spend but I'd like to try. So would u think it would be the mains board hat needs replacing? x

In Topic: Complete Novice Help

20 November 2012 - 10:10 PM

I thought I'd ordered the main mpu board but turns out i ordered a fell board :(. Will have look for the main board. On the main board there is a pic further up post there are 6 lights vertically and the ones that are lite are 3,4,5 lights. None of the lights are flashing the only ones lit are 3,4,5 on main board and one on a small board which I will upload pic of as not sure which is lamp so have taken pic of tHe two that are in that area. None of the boards have a light in the centre of the board. The first pic hasn't got any lights on at all the scone pic has one to the left of the board.

Can I ask what these switches are for in the third picture?

In Topic: Complete Novice Help

20 November 2012 - 02:17 PM

First picture is of the bit in the bottom left bit of the machine.
Second picture is where I replaced the board that I was told wasn't working and didn't have the light on and lights still not on. I've also taken the big board of that had 3 out of the six lights on and the battery wasn't soldered on properly so my partner has put that on and it doesn't have any sign of furring or leakage but the green case has 3 holes in. So is that good or bad? :(/> I haven't a clue where to go from here x

In Topic: Complete Novice Help

20 November 2012 - 10:53 AM

Thanks, do any of the boards look faulty? With the lights not being on on one of them n that? I don't understand why none of the front lights or anything comes on. Yer the top door switch thing is missing at mo x