MJElli

Thanks to all that helped me try and solve the problems I had, but it come the point where I was pulling my hair out, tried changing the varta battery, no good, had the power supply checked, no good, checked every single chuffing wire for dead ends etc, no good. A sad end I hear you say, nope my youngest daughter bumped into a geek, (sorry a very educated fruit machine engineer, thirteen years in the bee's knee's) that knew the inside of a rat's rear. Come to the house with the biggest box of Impulse cpu's mother board's coin selectors etc you've ever seen. Anyway's three hours later one fixed and serviced fruit machine to the tone of a hundred smackers.

1. Modern coin selector.

2. New coin board.

3. New main mother board. MPE (i think he said)

3. And a wire that shouldn't have been there which kept the machine from firing up in the first place, GRRRRRRR.

Hi all, just aquired a Impulse Spin-On-It that is as dead as the proverbial doh doh, as a matter of try it push it prod suck it and see i've found that the Varta Mempac batteries are leaking, no problemo seek code check voltage buy new, then replace.

Problem is the original battery reads as follows Hzero97 or HO (for oscar) 97 and nothing else, no other information as to what the voltage is.

Has anybody have the same machine and can tell me what the equivalent should be, as the above code aint doing nothing for me at all.