Hi I have a JPM Impact processor card with very light battery damage (1 or 2 tracks only damaged). Does anyone know of a good firm who can repair this type of PCB damage?
Hi - I'm replacing NV10 note acceptors with JCM Vega 100 note acceptors with JCM note recycler RC modules attached on two Scorpion 5 machines - a Reflex Double Agent Club and a Bellfruit Cops N Robbers Smash N Grab Club. I'm putting them in to solve a coin starvation problem.
The Vega sit inside the machine on the shelf next to the coin hopper unlike the NV10's which are attached to the door by the slot for notes to be put in the machine.
I've got a couple of questions if anyone has any knowledge of this:-
- Would I need a new front plate to attach around the note entrance slot (Vega bezel sits inside the machine)?
- Will I have to reroute the loom/plug which attached to the note acceptor?
- Can I get away without the dedicated Vega note acceptor metalwork (I don't have it at present)?
Hi all - I have a JPM Red Hot SIx (real machine) which works well with no problems. It was a 2006 rebuild by JPM. The only recent issues have been having to replace the battery on the processor card (fortunately although it had just started leaking it had not reached the board - battery was eight year old!).
Anyway - the machine has a blanking plate where you can fit a note acceptor and it looks like there is a connector on the end of the wiring loom just inside the machine where you would mount a note acceptor. Does anyone know whether it is possible to fit an acceptor to this machine and if so which one would I need to fit (NV4, NV10?) and how would I go about it?
Find content
Not Telling
