quality112

First of all apologies that my first post is asking for help, but if I can offer and help back regarding anything I will be more than happy.

I have recently acquired a Fantaztec JPM machine which I am am chuffed about from my next door neighbour , however I am having some issues.

It started off with a 60 00 error which I have found out is a general meter fault so I opened up the machine to check the connections to the meter which seemed ok , and the display on the meter is working fine. I check the connection on what I think is the motherboard and then the machine started working briefly then came up with and error 43. I opened it up again and checked the connection into what I think is the motherboard, then the display stopped working....
I decided to remove the motherboard after reading about batteries leaking, and found that the battery has leaked quite bad and a few of the terminals around the battery have corroded or have a powder like substance n them. Could this be the cause of the issue? Everything else seems to work fine on the machine and I am told it worked fine before it was store for the last year and a half. I have received some help on another forum that has identified the board as a Heber Pluto 6 board so i am now left with the option of sending the board to them for repair if they will do it expect it to cost circa £100. Or finding a replacement which seems hard... any ideas please guys?

I have included a picture of the damage...

Thanks

Dom